3.60M33 for PSP slim 下载(人肉翻译完成,有错请指出)

wind1084

等翻译~

We are proud to present the first custom firmware for the PSP Slim, and the first custom firmware
that runs using a 3.XX IPL (3.60)

3.60 M33 for PSP Slim has all the features of 3.52 M33, except the 1.50 kernel support, as
that kernel doesn't work properly on psp slim (hardware problems, screen problems).
3.60 M33 will load homebrew from GAME, GAME150 and GAME360 directories, but all will be executed
with 3.60 kernel.

This mean that some homebrews done specifically for the 1.50 kernel cannot work on 3.60 M33.
However, the adaptation of code to 2.XX+ kernels is not difficult, and homebrew developers can
port their aplications to work in these firmwares.

Included with the release is the M33 sdk for programmers.

Instalation:

The instalation is done using pandora battery and requires a fat psp with 1.50 or
custom firmware with 1.50 support to run a installer.
However once the memory stick installation is done, you can use it in whatever psp slim without
repeating the process again.

We want to thank C+D Team for having created Pandora and having opened the path to custom ipl's,
without which this cfw wouldn't exist.

Steps:

- Create a pandora battery and a pandora memory stick using the C+D team tools.
- Run the fat psp with the pandora memory stick inserted, but with a normal battery.
  Copy the directories pandora_slim and pandora_slim% to PSP/GAME or PSP/GAME150.

- Download official sony firmwares 3.40 and 3.50, and put them in pandora_slim directory
  with names 340.PBP and 350.PBP.

  To avoid confussion: These firmwares are used ONLY to extend the memory stick pandora kernel.
  NOTHING FROM THOSE FIRMWARES WILL EVER BE FLASHED ON THE SLIM.

- Run the program. It will quickly extract some prx's overwrting some of the pandora memory stick.

- Insert the pandora battery and the memory stick in the psp slim. It will boot. You won't see
  anything on the screen, because that kernel doesn't support the slim screen, but it is OK, you
  don't need a screen for the installation of 3.60 M33.

From here, you have 3 options:

- Press X to install M33. The process will last just few seconds, since the installer only
  needs to install the M33 custom prx's and IPL. After the process is finished, the installer
  will shutdown the psp automatically.

- Press L+R+triangle to uninstall M33 and go back to original 3.60. Note: this can't unbrick a
  psp slim, it will just remove M33 ipl. There is currently no unbricker for the psp slim, but
  we plan on doing one in the future.
  After uninstallation, psp will be shutdown automatically.

- Press square to dump the PSP Slim nand. Watch out: you need 66 MB of free space in the
  memory stick for this, otherwise your memory stick may end corrupted.

  This option uses the team C+D nand dumper. When the memory stick orange led stops blinking,
  the process will have finished, and you can either shutdown the psp, or use one of the two
  previous options.


F.A.Q

Q: My homebrew doesn't work.
A: as stated above, not all homebrews work due to 1.50 kernel missing.
   Wait for the programmer of that homebrew to port it to new kernels.

Q: How can i unbrick the PSP Slim?
A: if you have a semi-brick, you can restore it using recovery and flashing the corrupted files
   with usb flash. There is no real unbricker for PSP Slim yet, but we plan of doing one in the
   future using C+D Pandora Battery.

Q: is M33 gonna make a 3.60 cfw for the fat psp's?
A: The firmware as it is flashed in the slim psp's is only for psp slims. Whenever sony releases
   an updater, we'll support both, fat and slim psp's, but we are not gonna make a custom firmware
   using 3.60 slim dump, because it is not done for the fat psp. Stop listening stupid rumors of kids:
   we are 103% sure that Sony will continue releasing firmware updates for all psp's.

   Moreover, the 3.60 firmware was done before 3.52: the pops, for example, is a clone of the one of 3.50/3.51
   So it has nothing new for fat psp's.

Q: I liked the FW, what can I do to help M33?
A: You can contribute some money for all our members to get PSP Slims. Our paypal address is 33@yandex.ru[/email]

慢慢来~

我们很自豪地献上第一个PSP slim的自制固件以及第一个运行3.xx IPL(3.60)的自制固件

3.60 M33 for psp slim 拥有除了对1.5核心的支持的所有3.52M33的功能， 因为1。5核心不能在PSP slim上很好地运行（硬件问题， 屏幕问题）。
3。60m33可以从GAME, GAME150 GAME360运行自制程序但都会被用3。60核心来执行。

这意味着某些特别需要1.5核心才能运行的自制程序不能在3.60m33上运行。 但是，把编码转换到2.XX以上核心并不是很困难，自制程序的开发者会转换他们的程序来让它们运行在这个固件上。

包括在这次放出的是为程序员准备的M33开发套件

安装

这个安装过程是用神奇电池来完成的并且需要一个有1.5或者1.5自制固件核心的旧PSP来运行安装程序
但是只要记忆棒安装过程完成以后，你可以把它用在任何新PSP而不用再次重复这个过程。

我们要感谢C+D Team制作了神奇电池，打开了自制ipl之路，没有他们这个自制固件不会存在。

步骤：
1，使用C+D team的工具制作一个神奇电池和神奇记忆棒
2，塞入神奇记忆棒到旧PSP中并用正常电池启动，复制padora_slim和padora_slim%文件夹到 PSP/GAME或者PSP/GAME150.
3，下载官方固件3.40和3.50放到padora_slim文件夹里改名为340.PBP和350.PBP.
  避免误会：这些固件只是用来增强记忆棒的padora核心，没有任何东西会从这些固件刷到新P上！
4，运行程序，它会很快地解包一些prx覆盖掉记忆棒上的pandora核心。
5，插入神奇电池和神奇记忆棒到新PSP中。 它会启动PSP. 你不会在屏幕上看到任何东西因为这个核心不支持新PSP的屏幕，但这是正常的，你并不需要屏幕来安装3.60M33
从这里开始 你有3个选项：
1， 按X来安装M33. 整个过程会持续几秒钟，因为安装程序只需要安装M33 自制prx和IPL。安装过程完成以后，安装程序会自动关闭PSP
2,   按L+R+三角来卸载安装M33回到原版的3.60. 注意：这不能让砖头PSP slim解砖， 它只会去掉M33 ipl. 目前没有新PSP的解砖程序但我们正在计划在未来制作一个。
卸载完成后， PSP会自动关闭
3， 按方块来dump新psp的nand. 注意！你需要在记忆棒上有66MB多余空间，不然的话你的记忆棒有可能会废掉。
这个选项使用了 team C+D的nand dumper. 当记忆棒红色的灯停止闪烁的时候，这个过程将会结束， 你可以关掉PSP或者使用以上两个中任何一个选项。

[ 本帖最后由 wind1084 于 2007-9-11 09:28 编辑 ]

13481525110

yxh07 这也要发一帖？

181888

很兴奋吧yxh100

lzxp

首页留名yxh100

该死的铁通

好强的附件下载

tornix

英文的待会儿我翻译一下吧

x-8232

好了，新P有的玩了， 继续等老P的M33。。。

zenkiwang

这篇有点意思～等翻译～哈哈

fndgn

老P用的?还是新P

yuanlu

只要制作一个记忆棒~？那可以把制作好的记忆棒里的程序下载出来吗~？这样就不必谁都要用老PSP了